OUTDATED DOCUMENTATION

You are viewing archived documentation from the old Numba documentation site. The current documentation is located at https://numba.readthedocs.io.

Creating NumPy universal functions¶

There are two types of universal functions:

Those which operate on scalars, these are “universal functions” or ufuncs (see @vectorize below).
Those which operate on higher dimensional arrays and scalars, these are “generalized universal functions” or gufuncs (@guvectorize below).

The `@vectorize` decorator¶

Numba’s vectorize allows Python functions taking scalar input arguments to be used as NumPy ufuncs. Creating a traditional NumPy ufunc is not the most straightforward process and involves writing some C code. Numba makes this easy. Using the vectorize() decorator, Numba can compile a pure Python function into a ufunc that operates over NumPy arrays as fast as traditional ufuncs written in C.

Using vectorize(), you write your function as operating over input scalars, rather than arrays. Numba will generate the surrounding loop (or kernel) allowing efficient iteration over the actual inputs.

The vectorize() decorator has two modes of operation:

Eager, or decoration-time, compilation: If you pass one or more type signatures to the decorator, you will be building a Numpy universal function (ufunc). The rest of this subsection describes building ufuncs using decoration-time compilation.
Lazy, or call-time, compilation: When not given any signatures, the decorator will give you a Numba dynamic universal function (DUFunc) that dynamically compiles a new kernel when called with a previously unsupported input type. A later subsection, “Dynamic universal functions”, describes this mode in more depth.

As described above, if you pass a list of signatures to the vectorize() decorator, your function will be compiled into a Numpy ufunc. In the basic case, only one signature will be passed:

from numba import vectorize, float64

@vectorize([float64(float64, float64)])
def f(x, y):
    return x + y

If you pass several signatures, beware that you have to pass most specific signatures before least specific ones (e.g., single-precision floats before double-precision floats), otherwise type-based dispatching will not work as expected:

@vectorize([int32(int32, int32),
            int64(int64, int64),
            float32(float32, float32),
            float64(float64, float64)])
def f(x, y):
    return x + y

The function will work as expected over the specified array types:

>>> a = np.arange(6)
>>> f(a, a)
array([ 0,  2,  4,  6,  8, 10])
>>> a = np.linspace(0, 1, 6)
>>> f(a, a)
array([ 0. ,  0.4,  0.8,  1.2,  1.6,  2. ])

but it will fail working on other types:

>>> a = np.linspace(0, 1+1j, 6)
>>> f(a, a)
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: ufunc 'ufunc' not supported for the input types, and the inputs could not be safely coerced to any supported types according to the casting rule ''safe''

You might ask yourself, “why would I go through this instead of compiling a simple iteration loop using the @jit decorator?”. The answer is that NumPy ufuncs automatically get other features such as reduction, accumulation or broadcasting. Using the example above:

>>> a = np.arange(12).reshape(3, 4)
>>> a
array([[ 0,  1,  2,  3],
       [ 4,  5,  6,  7],
       [ 8,  9, 10, 11]])
>>> f.reduce(a, axis=0)
array([12, 15, 18, 21])
>>> f.reduce(a, axis=1)
array([ 6, 22, 38])
>>> f.accumulate(a)
array([[ 0,  1,  2,  3],
       [ 4,  6,  8, 10],
       [12, 15, 18, 21]])
>>> f.accumulate(a, axis=1)
array([[ 0,  1,  3,  6],
       [ 4,  9, 15, 22],
       [ 8, 17, 27, 38]])

The `@guvectorize` decorator¶

While vectorize() allows you to write ufuncs that work on one element at a time, the guvectorize() decorator takes the concept one step further and allows you to write ufuncs that will work on an arbitrary number of elements of input arrays, and take and return arrays of differing dimensions. The typical example is a running median or a convolution filter.

Contrary to vectorize() functions, guvectorize() functions don’t return their result value: they take it as an array argument, which must be filled in by the function. This is because the array is actually allocated by NumPy’s dispatch mechanism, which calls into the Numba-generated code.

Here is a very simple example:

@guvectorize([(int64[:], int64, int64[:])], '(n),()->(n)')
def g(x, y, res):
    for i in range(x.shape[0]):
        res[i] = x[i] + y

The underlying Python function simply adds a given scalar (y) to all elements of a 1-dimension array. What’s more interesting is the declaration. There are two things there:

the declaration of input and output layouts, in symbolic form: (n),()->(n) tells NumPy that the function takes a n-element one-dimension array, a scalar (symbolically denoted by the empty tuple ()) and returns a n-element one-dimension array;
the list of supported concrete signatures as per @vectorize; here, as in the above example, we demonstrate int64 arrays.

Note

1D array type can also receive scalar arguments (those with shape ()). In the above example, the second argument also could be declared as int64[:]. In that case, the value must be read by y[0].

We can now check what the compiled ufunc does, over a simple example:

>>> a = np.arange(5)
>>> a
array([0, 1, 2, 3, 4])
>>> g(a, 2)
array([2, 3, 4, 5, 6])

The nice thing is that NumPy will automatically dispatch over more complicated inputs, depending on their shapes:

>>> a = np.arange(6).reshape(2, 3)
>>> a
array([[0, 1, 2],
       [3, 4, 5]])
>>> g(a, 10)
array([[10, 11, 12],
       [13, 14, 15]])
>>> g(a, np.array([10, 20]))
array([[10, 11, 12],
       [23, 24, 25]])

Note

Both vectorize() and guvectorize() support passing nopython=True as in the @jit decorator. Use it to ensure the generated code does not fallback to object mode.

Overwriting input values¶

In most cases, writing to inputs may also appear to work - however, this behaviour cannot be relied on. Consider the following example function:

@guvectorize([(float64[:], float64[:])], '()->()')
def init_values(invals, outvals):
    invals[0] = 6.5
    outvals[0] = 4.2

Calling the init_values function with an array of float64 type results in visible changes to the input:

>>> invals = np.zeros(shape=(3, 3), dtype=np.float64)
>>> outvals = init_values(invals)
>>> invals
array([[6.5, 6.5, 6.5],
       [6.5, 6.5, 6.5],
       [6.5, 6.5, 6.5]])
>>> outvals
array([[4.2, 4.2, 4.2],
    [4.2, 4.2, 4.2],
    [4.2, 4.2, 4.2]])

This works because NumPy can pass the input data directly into the init_values function as the data dtype matches that of the declared argument. However, it may also create and pass in a temporary array, in which case changes to the input are lost. For example, this can occur when casting is required. To demonstrate, we can use an array of float32 with the init_values function:

>>> invals = np.zeros(shape=(3, 3), dtype=np.float32)
>>> outvals = init_values(invals)
>>> invals
array([[0., 0., 0.],
       [0., 0., 0.],
       [0., 0., 0.]], dtype=float32)

In this case, there is no change to the invals array because the temporary casted array was mutated instead.

Dynamic universal functions¶

As described above, if you do not pass any signatures to the vectorize() decorator, your Python function will be used to build a dynamic universal function, or DUFunc. For example:

from numba import vectorize

@vectorize
def f(x, y):
    return x * y

The resulting f() is a DUFunc instance that starts with no supported input types. As you make calls to f(), Numba generates new kernels whenever you pass a previously unsupported input type. Given the example above, the following set of interpreter interactions illustrate how dynamic compilation works:

>>> f
<numba._DUFunc 'f'>
>>> f.ufunc
<ufunc 'f'>
>>> f.ufunc.types
[]

The example above shows that DUFunc instances are not ufuncs. Rather than subclass ufunc’s, DUFunc instances work by keeping a ufunc member, and then delegating ufunc property reads and method calls to this member (also known as type aggregation). When we look at the initial types supported by the ufunc, we can verify there are none.

Let’s try to make a call to f():

>>> f(3,4)
12
>>> f.types   # shorthand for f.ufunc.types
['ll->l']

If this was a normal Numpy ufunc, we would have seen an exception complaining that the ufunc couldn’t handle the input types. When we call f() with integer arguments, not only do we receive an answer, but we can verify that Numba created a loop supporting C long integers.

We can add additional loops by calling f() with different inputs:

>>> f(1.,2.)
2.0
>>> f.types
['ll->l', 'dd->d']

We can now verify that Numba added a second loop for dealing with floating-point inputs, "dd->d".

If we mix input types to f(), we can verify that Numpy ufunc casting rules are still in effect:

>>> f(1,2.)
2.0
>>> f.types
['ll->l', 'dd->d']

This example demonstrates that calling f() with mixed types caused Numpy to select the floating-point loop, and cast the integer argument to a floating-point value. Thus, Numba did not create a special "dl->d" kernel.

This DUFunc behavior leads us to a point similar to the warning given above in “The @vectorize decorator” subsection, but instead of signature declaration order in the decorator, call order matters. If we had passed in floating-point arguments first, any calls with integer arguments would be cast to double-precision floating-point values. For example:

>>> @vectorize
... def g(a, b): return a / b
...
>>> g(2.,3.)
0.66666666666666663
>>> g(2,3)
0.66666666666666663
>>> g.types
['dd->d']

If you require precise support for various type signatures, you should specify them in the vectorize() decorator, and not rely on dynamic compilation.

Target	Description
cpu	Single-threaded CPU
parallel	Multi-core CPU
cuda	CUDA GPU Note This creates an ufunc-like object. See documentation for CUDA ufunc for detail.