3.2. Writing CUDA Kernels¶
CUDA has an execution model unlike the traditional sequential model used for programming CPUs. In CUDA, the code you write will be executed by multiple threads at once (often hundreds or thousands). Your solution will be modeled by defining a thread hierarchy of grid, blocks and threads.
Numba’s CUDA support exposes facilities to declare and manage this hierarchy of threads. The facilities are largely similar to those exposed by NVidia’s CUDA C language.
Numba also exposes three kinds of GPU memory: global device memory (the large, relatively slow off-chip memory that’s connected to the GPU itself), on-chip shared memory and local memory. For all but the simplest algorithms, it is important that you carefully consider how to use and access memory in order to minimize bandwidth requirements and contention.
3.2.2. Kernel declaration¶
A kernel function is a GPU function that is meant to be called from CPU code (*). It gives it two fundamental characteristics:
- kernels cannot explicitly return a value; all result data must be written to an array passed to the function (if computing a scalar, you will probably pass a one-element array);
- kernels explicitly declare their thread hierarchy when called: i.e. the number of thread blocks and the number of threads per block (note that while a kernel is compiled once, it can be called multiple times with different block sizes or grid sizes).
At first sight, writing a CUDA kernel with Numba looks very much like writing a JIT function for the CPU:
@cuda.jit def increment_by_one(an_array): """ Increment all array elements by one. """ # code elided here; read further for different implementations
(*) Note: newer CUDA devices support device-side kernel launching; this feature is called dynamic parallelism but Numba does not support it currently)
3.2.3. Kernel invocation¶
A kernel is typically launched in the following way:
threadsperblock = 32 blockspergrid = (an_array.size + (threadsperblock - 1)) // threadperblock increment_by_one[blockspergrid, threadsperblock](an_array)
We notice two steps here:
- Instantiate the kernel proper, by specifying a number of blocks
(or “blocks per grid”), and a number of threads per block. The product
of the two will give the total number of threads launched. Kernel
instantiation is done by taking the compiled kernel function
increment_by_one) and indexing it with a tuple of integers.
- Running the kernel, by passing it the input array (and any separate output arrays if necessary). By default, running a kernel is synchronous: the function returns when the kernel has finished executing and the data is synchronized back.
126.96.36.199. Choosing the block size¶
It might seem curious to have a two-level hierarchy when declaring the number of threads needed by a kernel. The block size (i.e. number of threads per block) is often crucial:
188.8.131.52. Multi-dimensional blocks and grids¶
To help deal with multi-dimensional arrays, CUDA allows you to specify
multi-dimensional blocks and grids. In the example above, you could
threadsperblock tuples of one, two
or three integers. Compared to 1D declarations of equivalent sizes,
this doesn’t change anything to the efficiency or behaviour of generated
code, but can help you write your algorithms in a more natural way.
3.2.4. Thread positioning¶
When running a kernel, the kernel function’s code is executed by every thread once. It therefore has to know which thread it is in, in order to know which array element(s) it is responsible for (complex algorithms may define more complex responsibilities, but the underlying principle is the same).
One way is for the thread to determines its position in the grid and block and manually compute the corresponding array position:
@cuda.jit def increment_by_one(an_array): # Thread id in a 1D block tx = cuda.threadIdx.x # Block id in a 1D grid ty = cuda.blockIdx.x # Block width, i.e. number of threads per block bw = cuda.blockDim.x # Compute flattened index inside the array pos = tx + ty * bw if pos < an_array.size: # Check array boundaries an_array[pos] += 1
Unless you are sure the block size and grid size is a divisor of your array size, you must check boundaries as shown above.
are special objects provided by the CUDA backend for the sole purpose of
knowing the geometry of the thread hierarchy and the position of the
current thread within that geometry.
These objects can be 1D, 2D or 3D, depending on how the kernel was
invoked. To access the value at each
dimension, use the
z attributes of these objects,
The thread indices in the current thread block. For 1D blocks, the index (given by the
xattribute) is an integer spanning the range from 0 inclusive to
numba.cuda.blockDimexclusive. A similar rule exists for each dimension when more than one dimension is used.
The shape of the block of threads, as declared when instantiating the kernel. This value is the same for all threads in a given kernel, even if they belong to different blocks (i.e. each block is “full”).
The block indices in the grid of threads launched a kernel. For a 1D grid, the index (given by the
xattribute) is an integer spanning the range from 0 inclusive to
numba.cuda.gridDimexclusive. A similar rule exists for each dimension when more than one dimension is used.
The shape of the grid of blocks, i.e. the total number of blocks launched by this kernel invocation, as declared when instantiating the kernel.
184.108.40.206. Absolute positions¶
Simple algorithms will tend to always use thread indices in the same way as shown in the example above. Numba provides additional facilities to automate such calculations:
Return the absolute position of the current thread in the entire grid of blocks. ndim should correspond to the number of dimensions declared when instantiating the kernel. If ndim is 1, a single integer is returned. If ndim is 2 or 3, a tuple of the given number of integers is returned.
Return the absolute size (or shape) in threads of the entire grid of blocks. ndim has the same meaning as in
With these functions, the incrementation example can become:
@cuda.jit def increment_by_one(an_array): pos = cuda.grid(1) if pos < an_array.size: an_array[pos] += 1
The same example for a 2D array and grid of threads would be:
@cuda.jit def increment_a_2D_array(an_array): x, y = cuda.grid(2) if x < an_array.shape and y < an_array.shape: an_array[x, y] += 1
Note the grid computation when instantiating the kernel must still be done manually, for example:
from __future__ import division # for Python 2 threadsperblock = (16, 16) blockspergrid_x = math.ceil(an_array.shape / threadsperblock) blockspergrid_y = math.ceil(an_array.shape / threadsperblock) blockspergrid = (blockspergrid_x, blockspergrid_y) increment_a_2D_array[blockspergrid, threadsperblock](an_array)